Items Search Results

PRE-AUCTION OFFERS INVITED NOW FOR MAJOR ASSETS

PRE-AUCTION OFFERS INVITED NOW

By Order of Secured Creditor

Prime Development Site in Las Cruces' Primary Retail Submarket with Access to Mesilla Valley Mall Ring Road

(SEE VIDEO OF TRUCK /CRANE IN OPERATION, SPEC SHEETS AND INSPECTION REPORTS IN PHOTO REEL) FORD F-750 XLT Truck Info: Year: 2006 Make: Ford Model: F-750 XLT 4x 2 Super Duty Vehicle Type: Crane Truck Mileage: 19,886 Body Type: Regular Cab Drive Line: 4x2; Dual Rear Wheels Engine Make: CUMMINS Type: L6, 5.9L (359 CID) ESN: 46586255 Fuel Type: Diesel Tire Size: 11R 22.5 XZE VIN #: 3FRXF75F06V384464 KNAPHEIDE Utility Bed / Body and Features Bed Size: 19.5ft x 8ft Model: PVMALST-196A SN: 958185-2006S Features Mounted Tool Box, Stowable Ladder ALTEC AC18-70B Hydraulic Telescopic Crane Info & Specs: Make: ALTEC Model: AC18-70B SN: 0406EP0058 Max Lift Cap: 18 Ton Max Standard Boom: 70 ft 3-Section Non-Insulated Boom (110ft w/ Jib) Max Sheave Height: 80ft Stowed Travel Height: 12.8ft Vehicle Travel Length: 38ft As-is Crane Working Radius: 180º Behind Cab (Option to have full 360º w/ additional purchase of bumper outrigger) Features and Upgrades: -GREER / ALTEC LMAP Control Screen Part No: A450261 - Side Mounted / Folding 1-Piece 24ft Jib (Extends additional 40ft) - Load Hook / Winch Stow Hitch - (6) Outrigger Pads - Manuals and Most Recent Inspection Reports from 2020   **$125 Document Fee added to the Purchase Price of each Titled Asset. Please allow 30-60 days for title processing. **

**Decommissioning and Loading by Seller in their Lakeland FL Location. No Fee.** mo. DA-20 W/ DO Sensor 480V, sn. TB-220170-03, dom. 6/2022, 480/277v, 17,5A, 3ph Original invoice of $94,350.00 shows these options: -SPX 3hp Product Supply Pump w/controls -Integrated Endress & Hauser Optical DO Sensor -Deaeration Pre-Filtration

Rigging Fee for Full Service Decommissioning and Loading: $12,500 Rigging-Only Fee "TBD pre-auction" if buyer promptly and completely decommissions the system and readies for removal and loading. Full Service will include fully decommissioning the system by disconnecting electrical and plumbing connections to code, breaking down and labeling brewhouse electrical connections and hard piping, and breaking down any assemblies. Rigging will also removing all units from building, tipping and skidding where necessary and loading. Building does not have a ground level access point. Egress has to occur through a single dock height door with no exterior loading dock space and requiring multiple pieces of heavy machinery. The lesser fee service will only include removing all units from building, tipping and skidding where necessary and loading. Fees for this service will need to be contracted with the rigging service separately after the auction. Add-on shipping services available if needed. Rigger contact info below, available for any technical questions or to discuss shipping options if needed. Stainless, In-line format with the following vessels: Mash Tun, Lauter Tun, Boil Kettle, Whirlpool, Hot Liquor Tank, 60bbl Cold Liquor Tank. Includes Heat Exchangers, Automated Control System, operator platform and all associated pumps and plumbing fixtures. Mark Harris Kellerhals’ Millwright (706) 248-8849 mark@kmindustrial.us

Rigging Fee for Simple Loading: $1,500 Rigger will be disconnecting, tipping and skidding where necessary, removing from building and loading. Building does not have a ground level access point. Egress has to occur through a single dock height door with no exterior loading dock space and requiring multiple pieces of heavy machinery. Fees for this service will need to be contracted with the rigging service separately after the auction. Add-on shipping services available if needed. Rigger contact info below, available for any technical questions or to discuss shipping options if needed. Stainless, jacketed tanks with fittings as shown. Mark Harris Kellerhals’ Millwright (706) 248-8849 mark@kmindustrial.us

Rigging Fee for Simple Loading: $1,500 Rigger will be disconnecting, tipping and skidding where necessary, removing from building and loading. Building does not have a ground level access point. Egress has to occur through a single dock height door with no exterior loading dock space and requiring multiple pieces of heavy machinery. Fees for this service will need to be contracted with the rigging service separately after the auction. Add-on shipping services available if needed. Rigger contact info below, available for any technical questions or to discuss shipping options if needed. Stainless, jacketed tanks with fittings as shown. Mark Harris Kellerhals’ Millwright (706) 248-8849 mark@kmindustrial.us

Rigging Fee for Simple Loading: $1,500 Rigger will be disconnecting, tipping and skidding where necessary, removing from building and loading. Building does not have a ground level access point. Egress has to occur through a single dock height door with no exterior loading dock space and requiring multiple pieces of heavy machinery. Fees for this service will need to be contracted with the rigging service separately after the auction. Add-on shipping services available if needed. Rigger contact info below, available for any technical questions or to discuss shipping options if needed. Stainless, jacketed tanks with fittings as shown. Mark Harris Kellerhals’ Millwright (706) 248-8849 mark@kmindustrial.us

Rigging Fee for Simple Loading: $1,500 Rigger will be disconnecting, tipping and skidding where necessary, removing from building and loading. Building does not have a ground level access point. Egress has to occur through a single dock height door with no exterior loading dock space and requiring multiple pieces of heavy machinery. Fees for this service will need to be contracted with the rigging service separately after the auction. Add-on shipping services available if needed. Rigger contact info below, available for any technical questions or to discuss shipping options if needed. Stainless, jacketed tanks with fittings as shown. Mark Harris Kellerhals’ Millwright (706) 248-8849 mark@kmindustrial.us

Mo DMA4500M and Alcolyzer BeerME as shown.

Mo DR6000

Mo 1000 S/N 27485

Mo 7FBCU25 with HOBART charger Mo 250CII Buyers are fully responsible for all removal-related actions and expenses. If needed, rigger can be contracted for packing, shipping or loading: Mark Harris Kellerhals’ Millwright (706) 248-8849 mark@kmindustrial.us

Rigging Fee for Simple Loading: $1,500 Rigger will be disconnecting plumbing and electrical connections to code, breaking down any assemblies, skidding where necessary, disposing of scrap plumbing and insulation, and loading. Item is expected to have to be lifted over the building. Fees for this service will need to be contracted with the rigging service separately after the auction. Add-on shipping services available if needed. Rigger contact info below, available for any technical questions or to discuss shipping options if needed. As shown. Must uninstall. Mark Harris Kellerhals’ Millwright (706) 248-8849 mark@kmindustrial.us

Rigging Fee for Simple Loading: $750 Rigger will be disconnecting electrical connections to code, breaking down any assemblies, skidding where necessary, removing from building and loading. Building does not have a ground level access point. Egress has to occur through a single dock height door with no exterior loading dock space and requiring multiple pieces of heavy machinery. Fees for this service will need to be contracted with the rigging service separately after the auction. Add-on shipping services available if needed. Rigger contact info below, available for any technical questions or to discuss shipping options if needed. As shown. Must uninstall. Mark Harris Kellerhals’ Millwright (706) 248-8849 mark@kmindustrial.us

Rigging Fee for Simple Loading: $1,500 Rigger will be disconnecting electrical connections to code, breaking down any assemblies, skidding where necessary, removing from building and loading. Building does not have a ground level access point. Egress has to occur through a single dock height door with no exterior loading dock space and requiring multiple pieces of heavy machinery. Fees for this service will need to be contracted with the rigging service separately after the auction. Add-on shipping services available if needed. Rigger contact info below, available for any technical questions or to discuss shipping options if needed. Includes grain auger and controller. Must uninstall. Mark Harris Kellerhals’ Millwright (706) 248-8849 mark@kmindustrial.us

Mo 150LT with heating elements. Buyers are fully responsible for all removal-related actions and expenses. If needed, rigger can be contracted for packing, shipping or loading: Mark Harris Kellerhals’ Millwright (706) 248-8849 mark@kmindustrial.us

Buyers are fully responsible for all removal-related actions and expenses. If needed, rigger can be contracted for packing, shipping or loading: Mark Harris Kellerhals’ Millwright (706) 248-8849 mark@kmindustrial.us

Includes carb stones, clamps, reducers and various stainless fittings as shown.

As shown. Must uninstall. Buyers are fully responsible for all removal-related actions and expenses. If needed, rigger can be contracted for packing, shipping or loading: Mark Harris Kellerhals’ Millwright (706) 248-8849 mark@kmindustrial.us

Wired directly into panel box as shown.